TL;DR: Split-screen Guide Display Board for Information Point
AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Basel, Switzerland. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.
About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family
Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Basel integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Switzerland buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. For Switzerland importers the working rhythm in Basel is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.
WF-G3399 Technical Specifications
| Parameter | AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) | Industry Average |
|---|---|---|
| Processor | RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | no NPU, CPU-only inference | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual HDMI 2.0 4K output plus eDP | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Payment peripherals | QR code scanner, NFC, barcode scanner, thermal printer, cash drawer | No bundled payment-peripheral driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Switzerland Buyers
The sixth obstacle is lifecycle mismanagement. Basel programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Switzerland venue fit-out cycles are longer than the parts remain in production.
AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a Basel integrator writes the directory application rather than kernel patches for Switzerland sites. AndroidSBC has now closed the 1st consecutive quarterly window on this family, with 41800 boards scheduled for Basel and Switzerland on the Hamburg - Zurich rail lane as of September 18, 2026.
Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards
Most Switzerland tenders shortlist two or three board vendors, and the shortlist usually collapses on the same axes: how many silicon options one vendor actually controls, how much of the peripheral stack is already written, and how the fleet gets updated after installation. The WF-G family is positioned against those axes for Basel programmes.
- vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
- vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
- vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
- vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.
Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends
Labour economics keep pushing the same direction. With information desks under staffing pressure in Switzerland, venue operators in Basel are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another dual-screen high-definition guide kiosk board, and each one has to be managed as part of a fleet rather than as a standalone screen.
- Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1331 as the directory plus promotion option.
- Transit, hospital and campus wayfinding banks: the mid-tier WF-G1331 and the industrial WF-G6180 sister SKUs form the public venue ladder, with route planning and multi-language content.
- Promotional walls and in-venue signage networks: WF-G6180 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.
The gap between a market forecast and a Basel order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Switzerland so integrators can sanity-check their own numbers.
Partner Success Story: Southern Cross Venues (stadium and resort venue operator supplier)
The Southern Cross Venues case in the Australia stadiums and resorts segment is a working example of how the WF-G family from AndroidSBC supports Basel integrators. Southern Cross Venues deployed 41800 WF-G guide boards for stadium concourse directories and resort wayfinding points.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Venues branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
As Southern Cross Venues Venue Systems Manager for Australia Stadiums and Resorts put it: Southern Cross Venues needed boards that survive a sealed outdoor housing through a Switzerland summer, and the wide-temperature WF-G SKUs held the 41800 screens in Basel through the full event season without a thermal shutdown.
Field Report: lobby directory terminal installation at a business hotel group
PINGHU, Shenzhen, September 18, 2026 - Liang Shu, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3399 boards booted with the full peripheral set attached and enumerated every module before the dual-screen high-definition guide kiosk content service started. The WF-G3399 smart guide kiosk Android motherboard order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Liang Shu, AndroidSBC field desk, PINGHU, Shenzhen. Switzerland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.
WF-G3399 Application Scenarios
The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.
- Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
- Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
- Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
- AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
- Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
- Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Basel.
- Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
- Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
- Venue programmes running in Basel: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.
Partnership Models for Basel Buyers
AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Basel and Switzerland, each with a different entry quantity and a different level of design control.
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
- ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
- Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.
AndroidSBC keeps the commercial structure simple for Basel and Switzerland: one family, three tracks, and no penalty for starting small and scaling up later.
Frequently Asked Questions
Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?
Answer: Yes. The dual-screen high-definition guide kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.
What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?
Answer: The RK3399 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Switzerland?
Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus OFCOM CH conformity and the CE marking with the OFCOM radio interface notification file set for Switzerland. The paperwork travels with the Port of Hamburg shipment rather than arriving as a follow-up email.
What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?
Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?
Answer: Yes. Custom Android and custom Linux builds are part of the ODM programme on the WF-G family. AndroidSBC works from the reference BSP, adds the partner applications and drivers, and keeps the result on a versioned branch so Basel teams can reproduce the build.
How are software updates and long-term support handled on the WF-G family?
Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so a Switzerland estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?
Answer: Yes. For Basel distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the OFCOM CH conformity file and the commercial invoice prepared to the destination requirement in Switzerland.
How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?
Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Basel integrator so the same fault does not recur on the next lot.
Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Basel integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.