TL;DR: RK3576 POS Board with LVDS EDP MIPI HDMI VGA for Restaurant Till
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Basel, Switzerland. The WF-P7601 POS Android motherboard spans the AI face payment POS terminal with 3D camera input and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, MIPI DSI plus HDMI output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC, a Wanlin Manufacturing Group export brand, treats the POS board as the long-lived part of the terminal, not the disposable one. The WF-P family is specified for a seven-year firmware window and 7x24 counter duty, and each lot ships with the receipt printer, barcode scanner, cash drawer and payment reader drivers already validated against the target Android build. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a Switzerland partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.
WF-P7601 Technical Specifications
| Parameter | AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 128GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | MIPI DSI plus HDMI output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-P family, the WF-P7601-A variant is the typical configuration for the face payment counter deployment use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Switzerland Buyers
The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Switzerland summer, and boards that pass a bench test at 25C start throttling behind a shop window.
On lead time the answer is allocation. LPDDR4X and eMMC parts are bought against a rolling forecast for the WF-P family, so a Basel partner on a call-off schedule gets a date that holds instead of a quote that expires. On September 23, 2026 the Basel programme moved from pilot to volume: 20500 boards released against the frame agreement, shipped on the Hamburg - Zurich rail lane with one frozen BOM across the whole quantity.
Competitive Comparison: WF-P7601 vs Competing POS Android Boards
The boards competing with the WF-P family in Switzerland tend to be single-platform designs. That is the root of three of the four differences below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The global POS payment terminal market was valued at about USD 123.15 billion in 2025 and is projected to reach roughly USD 215.45 billion by 2032, a compound annual growth rate near 8.25 percent, with the Asia Pacific region holding the largest share. For a Basel integrator that growth translates into a replacement cycle rather than a one-off project, and the board has to be specified for the third refresh, not the first.
- Entry counter tier: WF-P7601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The Switzerland market will keep absorbing Android POS boards for the rest of the decade. The question for Basel buyers is whether the board underneath the terminal is built to be re-ordered.
Partner Success Story: Southern Cross Lane Systems (supermarket and fuel forecourt integrator)
A Southern Cross Lane Systems deployment in the Australia and New Zealand retail segment illustrates how the WF-P POS board family supports Basel integrators. Southern Cross Lane Systems deployed 20500 WF-P boards across 61 supermarket lanes and forecourt cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Lane Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Southern Cross Lane Systems Technical Lead for Australia and New Zealand Retail: Southern Cross Lane Systems takes the wide-temperature WF-P tier for forecourt cabinets and the standard tier for store lanes, with 20500 boards across the Basel network.
Field Report: face payment counter deployment across a convenience chain
NANSHAN, September 23, 2026 - Man Qing, AndroidSBC field desk. What the Switzerland engineers checked first was the drawer pulse: the WF-P7601 fired the cash drawer on the RJ11 header across a thousand cycles without a miss. The WF-P7601 POS Android motherboard order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-P7601 AI face payment POS terminal with 3D camera input production lot includes the WF-P7601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Man Qing, AndroidSBC field desk, NANSHAN. Switzerland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P7601 Application Scenarios
The WF-P7601 AI face payment POS terminal with 3D camera input sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7601-A configuration is the typical build for the face payment counter deployment use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Basel.
- Convenience and small format stores: the WF-P3566 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3288 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3399 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P1330 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Basel: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Basel Buyers
For Switzerland importers the track choice changes the paperwork, not the board. The three options below are the standard ones.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Every track is open to Basel importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support an AI face payment POS terminal with 3D camera input?
Answer: Yes - AI face payment POS terminal with 3D camera input is supported across the WF-P line, and the Basel configuration is locked as the reference for later lots so re-orders behave identically.
Which silicon tiers are available in the WF-P family for Switzerland buyers?
Answer: Eight silicon tiers are offered, and the RK3576 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Basel partner can move between them without re-writing drivers.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.
What is the minimum order quantity and the sample lead time for Switzerland?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Basel partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Basel partner keeps the same image across re-orders.
How are firmware updates delivered to a Switzerland estate after deployment?
Answer: The OTA channel is staged and reversible. A Basel chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.
What shipping terms does AndroidSBC support for Switzerland orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Basel partner receives tracking with the lot.
What happens if a board fails in the field in Switzerland?
Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Basel call-off stock or the next production slot.
Contact AndroidSBC: Start Your WF-P7601 Sourcing Conversation
To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Basel integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Basel and Switzerland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.