TL;DR: Restaurant KDS Display Board for Supermarket Checkout Lane
AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Basel, Switzerland. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Basel integrator re-uses the existing harness instead of rewiring the counter. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Basel integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P3600 Technical Specifications
| Parameter | AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p plus 60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Switzerland Buyers
Most Basel buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.
Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 1st container of WF-P boards for Basel left the Longgang dock on September 23, 2026 carrying 144900 units, routed through the Hamburg - Zurich rail lane with the compliance file and the peripheral driver set already packed.
Competitive Comparison: WF-P3600 vs Competing POS Android Boards
Four differences decide whether a Switzerland POS rollout survives its second year, and they are all visible before the first lane goes live.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The Switzerland picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Basel integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P5270 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P7600 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The eight-tier WF-P line exists because Basel rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.
Partner Success Story: Southern Cross Lane Systems (supermarket and fuel forecourt integrator)
The Southern Cross Lane Systems case in the Australia and New Zealand retail segment is a working example of how the WF-P family from AndroidSBC supports Basel integrators. Southern Cross Lane Systems deployed 144900 WF-P boards across 61 supermarket lanes and forecourt cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Lane Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
Southern Cross Lane Systems Technical Lead for Australia and New Zealand Retail noted: Southern Cross Lane Systems takes the wide-temperature WF-P tier for forecourt cabinets and the standard tier for store lanes, with 144900 boards across the Basel network.
Field Report: restaurant counter cash register rollout
SHENZHEN, September 23, 2026 - Ling Yun, AndroidSBC field desk. The WF-P3600 shipped with staged OTA enabled, so the Switzerland team can pilot an update on ten lanes before releasing it across the estate. The WF-P3600 POS Android motherboard order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Ling Yun, AndroidSBC field desk, SHENZHEN. Switzerland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3600 Application Scenarios
The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Basel.
- Convenience and small format stores: the WF-P3602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3566 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3288 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3399 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Basel: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Basel Buyers
AndroidSBC does not force a track on Switzerland partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
AndroidSBC is recruiting local partners in Switzerland on all three tracks, and the qualification evidence needed to start is the same in each case.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?
Answer: It is. The WF-P family was specified around dual-screen cash register with printer and cash drawer, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which silicon tiers are available in the WF-P family for Switzerland buyers?
Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Switzerland buyers the choice is driven by counter throughput and by whether the lane needs an NPU.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for Switzerland?
Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to a Switzerland estate after deployment?
Answer: Updates are delivered through a staged OTA channel: the Basel partner pilots on a small group of lanes, holds the rest, and rolls back the image if the pilot shows a regression.
What shipping terms does AndroidSBC support for Switzerland orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Basel delivery date holds.
What happens if a board fails in the field in Switzerland?
Answer: The warranty path starts from the serial number. The Switzerland partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.
Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Basel integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.