TL;DR: Chromecast TV Stick Board
AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the Allwinner H618 board family serving Basel, Switzerland. The WF-H618-04 Allwinner H618 Android motherboard spans the IPTV and OTT dongle build for channel lineups and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.
About AndroidSBC and the Allwinner H618 Android Motherboard Family
AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration Allwinner H618 dongle board family at the Longgang source factory in Shenzhen. Every configuration runs the same H618 quad-core Cortex-A53 platform on Android 12, so a Basel integrator can qualify one board family and then move between HDMI, wireless, storage and control options without re-writing the launcher or re-cutting the enclosure. Each production lot is burned in for 72 hours with the HDMI output live, the playback loop running and the remote path exercised, and the serial number is logged against the test record so a Basel partner can trace a single unit back to its run.
WF-H618-04 Technical Specifications
| Parameter | AndroidSBC WF-H618-04 (IPTV and OTT dongle build for channel lineups) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with IR receiver plus 2.4G wireless mouse and keyboard | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-04 (IPTV and OTT dongle build for channel lineups) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Switzerland importers sourcing the WF-H618 family, the WF-H618-04-A variant is the typical configuration for the IPTV channel lineup deployment use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for Switzerland Buyers
The second problem is the remote path. A dongle is useless to a hotel guest if the IR receiver needs a pairing pass nobody can run, or if the Bluetooth voice remote drops after every standby cycle.
Storage is onboard eMMC on every WF-H618 configuration, with a TF card slot up to 64GB alongside it. Content and configuration survive an unattended power cycle, and the Basel partner does not have to send a technician to a room that lost its launcher. The 1st container of WF-H618 boards for Basel left the Longgang dock on September 28, 2026 carrying 145000 units, routed through the Hamburg - Zurich rail lane with the compliance file and the HDMI validation set already packed.
Competitive Comparison: WF-H618-04 vs Competing Android TV Dongle Boards
Four differences decide whether a Switzerland streaming rollout survives its second year, and they are all visible before the first device is plugged in.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Basel integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Basel usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Basel integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Basel.
Global Android TV, OTT Streaming and Smart Display Market Trends
Connectivity is entering the brief for unglamorous reasons. Remote recovery, staged OTA and proof-of-play reporting all need a network path and a clean update channel on the board, and the IPTV and OTT dongle build for channel lineups tier carries those rather than pushing the load onto a separate box.
- Entry playback tier: WF-H618-04 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-12 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-01 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
The twelve-configuration WF-H618 line exists because Basel rollouts are not uniform. One operator will use four of the twelve, and the point is that all four share one interface contract.
Partner Success Story: Southern Cross Stream Systems (consumer electronics importer)
The Southern Cross Stream Systems case in the Australia and New Zealand retail segment is a working example of how the WF-H618 family from AndroidSBC supports Basel integrators. Southern Cross Stream Systems placed 145000 WF-H618 boards into the retail electronics channel.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Stream Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
- Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
- Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
Southern Cross Stream Systems Category Manager for Australia and New Zealand Retail noted: Southern Cross Stream Systems sells the H618 dongle with an RCM file and a local plug variant, and 145000 units cleared into the Basel retail network on the first shipment.
Field Report: IPTV dongle rollout at a regional broadband operator
SHENZHEN, September 28, 2026 - Ling Yun, AndroidSBC field desk. The WF-H618-04 shipped with staged OTA enabled, so the Switzerland team can pilot an update on ten rooms before releasing it across the estate. The WF-H618-04 Allwinner H618 board order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-H618-04 IPTV and OTT dongle build for channel lineups production lot includes the WF-H618-04-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Ling Yun, AndroidSBC field desk, SHENZHEN. Swiss buyers ask for a Swiss plug variant, German, French and Italian language packs, and the CE file with the local radio notification bundled.
WF-H618-04 Application Scenarios
The WF-H618-04 IPTV and OTT dongle build for channel lineups sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-04-A configuration is the typical build for the IPTV channel lineup deployment use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-04 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-06 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-07 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-08 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-09 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in Basel: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for Basel Buyers
AndroidSBC does not force a track on Switzerland partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
AndroidSBC is recruiting local partners in Switzerland on all three tracks, and the qualification evidence needed to start is the same in each case.
Frequently Asked Questions
Does the Allwinner H618 board family support an IPTV and OTT dongle build for channel lineups?
Answer: It is. The WF-H618 family was specified around IPTV and OTT dongle build for channel lineups, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which configurations are available in the WF-H618 family for Switzerland buyers?
Answer: The WF-H618 family spans 2GB LPDDR4 with 16GB onboard eMMC plus a TF card slot up to 64GB, HDMI 2.0a or HDMI 2.1 at 4K*2K UHD, and IR, Bluetooth or 2.4G control. For Switzerland buyers the choice is driven by screen availability and by whether the site needs unattended power cycling.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: It does. The HDMI output profile and the control mapping are validated together on the Longgang bench against the screen model the Basel partner names, and the result is written into the shipment file.
What is the minimum order quantity and the sample lead time for Switzerland?
Answer: AndroidSBC quotes a sample MOQ of one carton with a 1-3 day dispatch from Shenzhen, and a 15-30 day production window on bulk orders for Switzerland buyers.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC builds custom Android 12 images with the partner boot animation, launcher, pre-installed application set and UI trimming, and the image is versioned so Basel partners can roll back.
How are firmware updates delivered to a Switzerland device estate after deployment?
Answer: Updates are delivered over a staged OTA channel. The Switzerland team pilots on a small group of units, then releases across the estate, and every build carries a rollback image.
What shipping terms does AndroidSBC support for Switzerland orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW terms, and ships to Amazon FBA warehouses or third-party consolidation warehouses on the Port of Hamburg lane for Switzerland orders.
What happens if a unit fails in the field in Switzerland?
Answer: Field failures are handled against the serialised test record. The Basel partner files the serial number, AndroidSBC traces the bench run, and a replacement from the same configuration ships on the next lane.
Contact AndroidSBC: Start Your WF-H618-04 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the Allwinner H618 dongle family. Basel integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-H618 family.