TL;DR: POS Board 512GB eMMC for Pharmacy Counter
AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Basel, Switzerland. The WF-P7600 POS Android motherboard spans the dual-screen POS terminal with cashier and customer display and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, LVDS plus HDMI dual independent output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family covers the full span a Basel retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Basel partner can trace a single board back to its run.
WF-P7600 Technical Specifications
| Parameter | AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | LVDS plus HDMI dual independent output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch on both panels | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-P family, the WF-P7600-A variant is the typical configuration for the supermarket checkout lane rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Switzerland Buyers
Then there is the fiscal layer. In Switzerland the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.
AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the OFCOM CH documentation records the actual parts used, so the Basel partner re-ordering in a year receives a board that behaves the same way. The 1st release for Basel - 70300 units on September 23, 2026, Hamburg - Zurich rail lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.
Competitive Comparison: WF-P7600 vs Competing POS Android Boards
Against the boards Basel integrators are currently offered, the WF-P family is differentiated on four points that a checkout lane actually feels.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Within the Switzerland market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The dual-screen POS terminal with cashier and customer display sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.
- Entry counter tier: WF-P7600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3566 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3288 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
What a Basel integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.
Partner Success Story: Southern Cross Lane Systems (supermarket and fuel forecourt integrator)
A Southern Cross Lane Systems programme in the Australia and New Zealand retail segment illustrates how the WF-P family from AndroidSBC supports Basel integrators on the ground. Southern Cross Lane Systems deployed 70300 WF-P boards across 61 supermarket lanes and forecourt cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Lane Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
As Southern Cross Lane Systems Technical Lead for Australia and New Zealand Retail explained: Southern Cross Lane Systems takes the wide-temperature WF-P tier for forecourt cabinets and the standard tier for store lanes, with 70300 boards across the Basel network.
Field Report: dual-screen checkout lane rollout at a regional supermarket group
YANTIAN, September 23, 2026 - Heng Yu, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P7600 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P7600 POS Android motherboard order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-P7600 dual-screen POS terminal with cashier and customer display production lot includes the WF-P7600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Heng Yu, AndroidSBC field desk, YANTIAN. Switzerland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P7600 Application Scenarios
The WF-P7600 dual-screen POS terminal with cashier and customer display sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7600-A configuration is the typical build for the supermarket checkout lane rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Basel.
- Convenience and small format stores: the WF-P3399 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P1330 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P6180 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P5270 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Basel: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Basel Buyers
The commercial structure below is what Basel partners sign in practice - pick the one that matches how the business already buys.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whichever track a Switzerland partner starts on, the technical deliverable is identical - the same board, the same driver set and the same compliance pack.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen POS terminal with cashier and customer?
Answer: Yes. The dual-screen POS terminal with cashier and customer is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Basel.
Which silicon tiers are available in the WF-P family for Switzerland buyers?
Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3576 tier specified here is validated for Switzerland compliance with the same evidence pack as the rest.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes, and the configuration is documented per lot. The Basel partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.
What is the minimum order quantity and the sample lead time for Switzerland?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Basel partner reference image.
How are firmware updates delivered to a Switzerland estate after deployment?
Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Basel partner can hold lanes, pilot on ten, and revert any wave that misbehaves.
What shipping terms does AndroidSBC support for Switzerland orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Basel partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Switzerland?
Answer: AndroidSBC holds service stock for Basel partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.
Contact AndroidSBC: Start Your WF-P7600 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Basel integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Basel and Switzerland buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.