TL;DR: POS Motherboard Gigabit Ethernet for Convenience Store Counter
AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-P family serving Basel, Switzerland. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Basel and Switzerland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
For Basel integrators the WF-P family answers the question that usually blocks a rollout: will the board drive both the cashier screen and the customer display, and will the cash drawer fire on the right pulse. AndroidSBC ships the dual-screen configuration, the RJ11 or RJ12 drawer header and the printer handshake as a validated set, not as a list of interfaces on a datasheet. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Switzerland, bundled with the lot so the importer clears customs without a second round of test reports.
WF-P3602 Technical Specifications
| Parameter | AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | MIPI DSI output at 720p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | -10C to 55C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Switzerland importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Switzerland Buyers
The first obstacle Basel buyers hit when sourcing POS boards out of China is not price, it is continuity. A board qualified in January arrives in June with a different eMMC part, and the receipt printer that worked in the pilot stops responding on the second batch.
The last piece is the qualification run. Before a Switzerland rollout the partner sends the actual printer, scanner and drawer models to Longgang, AndroidSBC validates the combination on the bench, and the resulting configuration is locked as the reference for every later lot. By September 23, 2026 the Basel partner had taken delivery of 95200 boards across the Hamburg - Zurich rail lane, with no silicon substitution between the pilot batch and the first volume release.
Competitive Comparison: WF-P3602 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions a Basel chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to a Basel buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.
- Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The Switzerland demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Basel partner is budgeting a multi-year refresh, not a single purchase order.
Partner Success Story: Southern Cross Lane Systems (supermarket and fuel forecourt integrator)
A recent Southern Cross Lane Systems deployment in the Australia and New Zealand retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Basel integrators. Southern Cross Lane Systems deployed 95200 WF-P boards across 61 supermarket lanes and forecourt cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Lane Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus OFCOM CH conformity, all bundled into the Shenzhen source-factory shipment.
According to Southern Cross Lane Systems Technical Lead for Australia and New Zealand Retail: Southern Cross Lane Systems takes the wide-temperature WF-P tier for forecourt cabinets and the standard tier for store lanes, with 95200 boards across the Basel network.
Field Report: tableside ordering handheld rollout at a casual dining group
BAOLONG, September 23, 2026 - Dian Mo, AndroidSBC field desk. For the mobile handheld POS with 4G and barcode engine brief the WF-P3602 was configured with the barcode scanner on USB and the printer on RS232, the combination the Switzerland partner runs in production. The WF-P3602 POS Android motherboard order for Basel, Switzerland cleared the burn-in station on schedule and is en route via the Hamburg - Zurich rail lane.
The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Switzerland integrators, the OFCOM CH conformity plus CE marking with the OFCOM radio interface notification paperwork is bundled.
Filed by Dian Mo, AndroidSBC field desk, BAOLONG. Switzerland integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3602 Application Scenarios
The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Basel.
- Convenience and small format stores: the WF-P7600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Basel: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Basel Buyers
For Basel and Switzerland buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Switzerland partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?
Answer: Yes. AndroidSBC validates mobile handheld POS with 4G and barcode engine on the bench with the actual peripherals the Basel partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for Switzerland buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Basel partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Basel partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for Switzerland?
Answer: For Basel buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.
How are firmware updates delivered to a Switzerland estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for Switzerland orders?
Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Basel partner books the lane that suits the import process.
What happens if a board fails in the field in Switzerland?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Basel programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation
For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Basel integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Switzerland buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.